Are you doing better with an E8400 or E8500? My Rig: PowerSupply: 500w Colors atx. I also appreciate your concern about Intel processor compatibility. Is it safe to overclock notebooks in general? Age Newest 144 Months 60+ Months Much more recent. You only need a tiny bit of compound — about the size of a grain of rice — check out the for more instructions. Modern Quad core processors offer nearly three times more performance on both and workloads. Joseph Glover May 29th, 2008 at 9:10 am Hello again boys.
Functionality, performance, and other benefits of this feature may vary depending on system configuration. Even with the use of thermal-paste this would lead to insulation which is bad. Thank you very much, and please respond with a step by step guide to help me. Bus Speed A bus is a subsystem that transfers data between computer components or between computers. Effective speed is adjusted by current prices to yield a rating which is geared towards gamers. The thing is i dont really have a clue how to do it.
April 2nd, 2008 at 7:10 am Hey Blackiice. April 6th, 2008 at 1:58 am Hi, I have since overclocked my wolfdale to 3. Is that a good reading or should I stick to real temp? March 9th, 2008 at 1:46 pm Out of interest for myself and other readers, what timings are you using on those corsair sticks Prospero? Processor numbers differentiate features within each processor family, not across different processor families. Refer to Datasheet for formal definitions of product properties and features. Would this make much difference? Lapping the heatsink is always a good idea, since this smoothens the surface which is good for heat dissipation. I learned that the hard way, when when a Chieftec unit blew up and took out my motherboard, video card, and sound card with it. It runs in the 30 to 40 degree Celsius range.
?? I think it would be wise so long as you have excluded the possibility that the temperature reading is fallacious to try cleaning your heatsink as described above and apply new compound — arctic silver is my favorite. Only solution is to buy a new heatsink. I read through this whole post, including all the 80 comments, and tried the settings as mentioned above, but still not working. This does wonders for heat transfer. Yea, I run a C0, but luckily I havent got the stuck sensor problem. The core voltage seems to drop when under load 1.
More important for gaming than the number of cores and threads is the clock rate. Im running Orthos over-night to see how they hold up. But what do you mean by curved? The Pentium Dual-Core brand was used for mainstream x86-architecture microprocessors from Intel from 2006 to 2009 when it was renamed to Pentium. It is a shame to power it with a piece of junk. . And it has an improved instruction set.
I have arrived safely to 4ghz only then that the ram is not supported more then went over. If sold in bulk, price represents individual unit. My wolfdale must have the stuck temp sensor, as both core temps, never goes below 68c. However, the performance gain without specific multi-core optimization is minimal. Is it speedier than the e8200? I know for dam sure shes clockable to atleast 3. I have a wolfdale e8400 fairly new just assembled.
I just bought it because it makes the board a bit more future proof. Good range for what I need and the fluctuation does not cause any crashes. So just put a fan in the case somehow even if you have to duck tape it or wire-twisty it to the case to blow on your memory. And that's with a stock fan and heat sink! Do not try this with a stock cooler, cheap mobo, and lower grade chips. Prime95 I have now got it under water cooling and took it to 3. It offers 2 Physical Cores 2 Logical , clocked at 2.
Thanks so much for all the effort! I've easily clocked this out to 3. March 9th, 2008 at 1:55 pm The sticks run 5-5-5-18 right now. Long story short: Need to overclock my new E8200 to say 3. I was desperate for a new processor as Visual Studio compiling time is driving me crazy! I would like to know some information about the issue so that we could help you better. I have figured out most of the settings and applied them in bios and its reading 3ghz ok. Cons: original heatsink and fan were not to my liking.